Subject: Re: baidarka Source for frame wood in NE
From: paul banks (bckp@jps.net)
Date: Sat Jan 22 2000 - 23:02:26 EST
-----Original Message-----
From: RCH3149@aol.com <RCH3149@aol.com>
To: baidarka@lists.intelenet.net <baidarka@lists.intelenet.net>
Date: Saturday, January 22, 2000 09:25 PM
Subject: Re: baidarka Source for frame wood in NE
>In a message dated 00-01-19 22:37:01 EST, you write:
>
><< Subj: Re: baidarka Source for frame wood in NE
> From: bckp@jps.net (paul banks)
>... If you get it shipped you could try Jackel enterprises 800 711 wood.
>They are shipping me some red and yellow cedar for paddles. Condon's was
too
>far and the difference in price will pay for the shipping... >>
>
>In what format do you order wood from the likes of Jacke? Do you just give
>them a bill of materials and let them have at it or do you figure out what
>quantity of standard commercial sized pieces you need to cut the pieces
>yourself?
>-
>I'm not exactly sure what you mean. I know what I need and they know what
they have, we talk and take it from there. For a paddle I want a knot free
piece 2 inches thick (8/4) or nearly so, 8feet long, and at least 4 inches
wide, or multiples of 4 inches. It must be fairly flat because when I joint
it I will lose some thickness. If I waste some I'm still going to get a
paddle for not much money.
-
Baidarka Mailing List - All postings copyright the author and not to be
reproduced outside Baidarka or Baidarka archives without author's permission
Submissions: baidarka@lists.intelenet.net
Subscriptions: baidarka-request@lists.intelenet.net
Searchable archive: http://rtpnet.org/robroy/baidarka
This archive was generated by hypermail 2b27 : Tue Feb 01 2000 - 21:24:52 EST