Subject: Re: [baidarka] Marine Ply at ends
From: Philip Jacobs (jaco0253@umn.edu)
Date: Wed Oct 15 2003 - 19:31:56 EDT
Thinned, oil based marine varnish would be annother choice that would
remain clear. Thin the first coat with about 10 percent thinner, then do a
full (unthinned) coat when it dries.
On 15 Oct 2003, David E Sherman wrote:
> Thanks for the thoughtful repsonses.....my thinking is that I will go
> the low toxicity route. See no reason, after considering the repsonses,
> to go with thinned epoxy. The oil based paint sounds like the easiest,
> most cost effective and durable.
-
Baidarka Mailing List - All postings copyright the author and not to be
reproduced outside Baidarka or Baidarka archives without author's permission
Submissions: baidarka@paddlewise.net
Subscriptions: baidarka-request@paddlewise.net
Searchable archive: http://rtpnet.org/robroy/baidarka
This archive was generated by hypermail 2b27 : Sat Nov 01 2003 - 01:30:02 EST