Baidarka Mailing List
By Author

• Aaron Cunningham
  • Re: [baidarka] Rib Steaming (Fri Oct 24 2003 - 20:18:23 EDT)
  • RE: [baidarka] alminated coaming (Mon Oct 20 2003 - 01:31:19 EDT)
  • RE: [baidarka] Baidarka launching (Sun Oct 19 2003 - 13:55:46 EDT)
  • Re: [baidarka] laminating [was: Holsclaw bender] (Wed Oct 15 2003 - 14:31:23 EDT)
  • RE: [baidarka] gunwales stock (Thu Oct 02 2003 - 21:48:41 EDT)
• B
  • Re: [baidarka] Question about Aluminum (Fri Oct 17 2003 - 16:53:23 EDT)
  • [baidarka] Question about Vinyl skin (Wed Oct 08 2003 - 15:21:16 EDT)
• Bill
  • RE: [baidarka] Baidarka launching (Mon Oct 20 2003 - 03:41:24 EDT)
  • [baidarka] Baidarka launching (Sun Oct 19 2003 - 06:33:52 EDT)
  • Re: [baidarka] laminating [was: Holsclaw bender] (Sat Oct 18 2003 - 04:51:53 EDT)
  • [baidarka] Clothing for kayaking on Columbia river? (Sun Oct 12 2003 - 05:15:30 EDT)
• Bill Samson
  • Re: [baidarka] Rib steaming cont. (Sun Oct 26 2003 - 17:57:39 EST)
  • Re: [baidarka] Baidarka launching (Sun Oct 19 2003 - 14:16:27 EDT)
  • Re: [baidarka] Marine Ply at ends (Wed Oct 15 2003 - 15:33:29 EDT)
  • Re: [baidarka] open 2-person cockpit (Wed Oct 15 2003 - 14:03:23 EDT)
  • Re: [baidarka] Marine Ply at ends (Wed Oct 15 2003 - 08:09:11 EDT)
  • Re: [baidarka] boat width (Sat Oct 11 2003 - 14:40:22 EDT)
  • Re: [baidarka] gunwales stock (Fri Oct 03 2003 - 03:18:03 EDT)
• Bob La Quey
  • Re: [baidarka] alminated coaming (Mon Oct 20 2003 - 21:42:32 EDT)
  • Re: [baidarka] laminating [was: Holsclaw bender] (Wed Oct 15 2003 - 07:53:05 EDT)
• Brian Nystrom
  • Re: [baidarka] Rib steaming (Sat Oct 25 2003 - 10:32:10 EDT)
• Charles Hall
  • RE: [baidarka] Towing a small raft for water (Wed Oct 01 2003 - 15:41:09 EDT)
• Dan Freidus
  • Re: [baidarka] Question about Vinyl skin (Wed Oct 08 2003 - 19:51:56 EDT)
• David E Sherman
  • Re: [baidarka] Marine Ply at ends (Wed Oct 15 2003 - 19:22:53 EDT)
  • Re: [baidarka] Marine Ply at ends (Wed Oct 15 2003 - 07:50:55 EDT)
• dick van Zanten
  • (no subject) (Fri Oct 17 2003 - 09:55:49 EDT)
  • Re: [baidarka] boat width (Sun Oct 12 2003 - 05:04:51 EDT)
• Garry Jackson
  • [baidarka] alminated coaming (Sun Oct 19 2003 - 23:18:47 EDT)
  • Re: [baidarka] laminating [was: Holsclaw bender] (Wed Oct 15 2003 - 23:07:20 EDT)
• Hjerrild, Kathryn
  • Re: [baidarka] laminating [was: Holsclaw bender] (Wed Oct 15 2003 - 10:08:04 EDT)
• Joe Street
  • Re: [baidarka] Towing a small raft for water (Fri Oct 03 2003 - 09:01:43 EDT)
  • Re: [baidarka] Towing a small raft for water (Thu Oct 02 2003 - 09:01:53 EDT)
  • Re: [baidarka] Towing a small raft for water (Wed Oct 01 2003 - 16:18:54 EDT)
• Joey
  • (no subject) (Wed Oct 15 2003 - 12:03:40 EDT)
• Juan Ochoa
  • Re: [baidarka] Towing a small raft for water (Thu Oct 02 2003 - 12:44:31 EDT)
• Kathryn Hjerrild
  • [baidarka] used Holsclaw bender? (Sun Oct 12 2003 - 22:48:48 EDT)
• Michael Daly
  • Re: [baidarka] Rib steaming cont. (Sun Oct 26 2003 - 22:35:31 EST)
  • Re: [baidarka] Rib steaming cont. (Sun Oct 26 2003 - 13:13:59 EST)
• MICHAEL SILVIUS
  • Re: [baidarka] george dyson's # (Thu Oct 30 2003 - 17:59:28 EST)
  • Re: [baidarka] Towing a small raft for water (Thu Oct 02 2003 - 13:39:29 EDT)
  • Re: [baidarka] Towing a small raft for water (Thu Oct 02 2003 - 10:22:19 EDT)
  • [baidarka] heat seal fabrics for water bags. (Wed Oct 01 2003 - 19:56:16 EDT)
  • Re: [baidarka] Towing a small raft for water (Wed Oct 01 2003 - 19:23:28 EDT)
• Pasi Parnanen
  • Re: [baidarka] Joey's SoF (Wed Oct 15 2003 - 16:52:49 EDT)
• Paul Raymond
  • Re: [baidarka] Marine Ply at ends (Wed Oct 15 2003 - 17:02:39 EDT)
  • Re: [baidarka] laminating [was: Holsclaw bender] (Wed Oct 15 2003 - 16:35:03 EDT)
  • Re: [baidarka] used Holsclaw bender? (Tue Oct 14 2003 - 18:15:01 EDT)
  • Re: [baidarka] Question about Vinyl skin (Fri Oct 10 2003 - 17:22:27 EDT)
• Peter Chopelas
  • Re: [baidarka] Rib Steaming (Fri Oct 24 2003 - 22:29:23 EDT)
  • Re: [baidarka] distance from backbrace to masilk (Tue Oct 21 2003 - 21:38:16 EDT)
  • Re: [baidarka] alminated coaming (Mon Oct 20 2003 - 20:24:51 EDT)
  • Re: [baidarka] alminated coaming (Mon Oct 20 2003 - 13:08:13 EDT)
  • Re: [baidarka] Baidarka launching (Mon Oct 20 2003 - 12:35:01 EDT)
  • Re: [baidarka] laminating [was: Holsclaw bender] (Wed Oct 15 2003 - 21:18:40 EDT)
  • Re: [baidarka] boat width (Tue Oct 14 2003 - 22:28:37 EDT)
  • Re: [baidarka] laminating [was: Holsclaw bender] (Tue Oct 14 2003 - 21:52:40 EDT)
  • Re: [baidarka] used Holsclaw bender? (Tue Oct 14 2003 - 13:22:51 EDT)
  • Re: [baidarka] gunwales stock (Mon Oct 06 2003 - 22:03:39 EDT)
• Philip Jacobs
  • Re: [baidarka] alminated coaming (Mon Oct 20 2003 - 20:53:28 EDT)
  • Re: [baidarka] alminated coaming (Mon Oct 20 2003 - 15:22:04 EDT)
  • Re: [baidarka] Marine Ply at ends (Wed Oct 15 2003 - 19:31:56 EDT)
• Pierce Nichols
  • Re: [baidarka] Marine Ply at ends (Wed Oct 15 2003 - 13:58:25 EDT)
  • Re: [baidarka] No Subject (Wed Oct 15 2003 - 13:59:54 EDT)
• raynalds@spiritone.com
  • [baidarka] Update on Towing a small raft for water (Fri Oct 31 2003 - 01:42:51 EST)
  • RE: [baidarka] Towing a small raft for water (Thu Oct 02 2003 - 23:17:06 EDT)
• Ron Curtis
  • [baidarka] The Fast Runner (Mon Oct 27 2003 - 00:43:30 EST)
• Schena@aol.com
  • [baidarka] george dyson's # (Thu Oct 30 2003 - 12:17:58 EST)
  • Re: [baidarka] Rib steaming cont. (Mon Oct 27 2003 - 13:48:52 EST)
  • Re: [baidarka] Rib steaming cont. (Sun Oct 26 2003 - 15:11:43 EST)
  • Re: [baidarka] Rib steaming (Sun Oct 26 2003 - 09:17:07 EST)
  • Re: [baidarka] Rib steaming cont. (Sun Oct 26 2003 - 09:01:20 EST)
  • Re: [baidarka] Rib Steaming (Sat Oct 25 2003 - 09:02:44 EDT)
  • [baidarka] Rib Steaming (Fri Oct 24 2003 - 18:51:16 EDT)
  • Re: [baidarka] distance from backbrace to masilk (Wed Oct 22 2003 - 10:54:15 EDT)
  • [baidarka] distance from backbrace to masilk (Tue Oct 21 2003 - 21:10:43 EDT)
  • Re: [baidarka] boat width (Sat Oct 11 2003 - 15:26:59 EDT)
  • Re: [baidarka] boat width (Sat Oct 11 2003 - 15:23:34 EDT)
  • [baidarka] boat width (Sat Oct 11 2003 - 13:26:17 EDT)
  • Re: [baidarka] gunwales stock (Fri Oct 03 2003 - 16:34:16 EDT)
  • [baidarka] gunwales stock (Thu Oct 02 2003 - 20:12:39 EDT)
• Scott Calman
  • RE: [baidarka] Rib Steaming (Fri Oct 24 2003 - 19:12:58 EDT)
  • RE: [baidarka] Towing a small raft for water (Mon Oct 06 2003 - 14:23:20 EDT)
  • RE: [baidarka] Towing a small raft for water (Thu Oct 02 2003 - 11:56:26 EDT)
  • RE: [baidarka] Towing a small raft for water (Wed Oct 01 2003 - 15:12:18 EDT)
• stlowe@hotmail.com
  • RE: [baidarka] heat seal fabrics for water bags. (Wed Oct 01 2003 - 22:55:46 EDT)
• thomas-simpson
  • Re: [baidarka] Update on Towing a small raft for water (Fri Oct 31 2003 - 18:16:46 EST)
• Tom Yost
  • Re: [baidarka] Question about Aluminum (Mon Oct 20 2003 - 18:48:29 EDT)
  • Re: [baidarka] Question about Aluminum (Mon Oct 20 2003 - 18:43:35 EDT)
  • Re: [baidarka] Baidarka launching (Sun Oct 19 2003 - 10:15:47 EDT)
  • Re: [baidarka] laminating [was: Holsclaw bender] (Thu Oct 16 2003 - 00:21:03 EDT)
  • Re: [baidarka] Marine Ply at ends (Thu Oct 16 2003 - 00:31:50 EDT)
  • Re: [baidarka] Question about Vinyl skin (Thu Oct 09 2003 - 17:51:57 EDT)
• Windwalker
  • [baidarka] Yaks/Camping/Sail Canoes (Fri Oct 24 2003 - 05:33:25 EDT)
• wolfgang brinck
  • RE: [baidarka] Towing a small raft for water (Wed Oct 01 2003 - 18:45:05 EDT)

Last message date: Fri Oct 31 2003 - 17:25:47 EST
Archived on: Sat Nov 01 2003 - 01:30:02 EST

This archive was generated by hypermail 2b27 : Sat Nov 01 2003 - 01:30:02 EST