Subject: Re: [baidarka] Western Red Cedar for gunwales
From: incoming.verizon.net (j.notsewc@VERIZON.NET)
Date: Tue Jan 03 2006 - 22:18:09 EST
Tom, do you have any dimensions on that boat for us?
Thanks
John
----- Original Message -----
From: "Tom Yost" <tom_yost@msn.com>
To: <baidarka@paddlewise.net>
Sent: Thursday, December 29, 2005 5:06 PM
Subject: Re: [baidarka] Western Red Cedar for gunwales
> Bill Wrote:
>
> >That looks VERY elegant! Are the bow and stern plates ply as well?
>
> Thanks. The bow and stern are 1/2in exterior grade plywood, same for the
> cross sections and the coaming. The stringers are glued to the cross
> sections with epoxy and all connections are pegged with 3/16" dowels.
>
> The Sea Rider was designed as an aluminum folding kayak, but
> non-traditional construction is just as easily done in wood or a
combination
> of wood and aluminum.
>
> Below is a Link to the folding version.
>
> http://yostwerks.com/NewPage15.html
>
> Regards,
>
> Tom
> reproduced outside Baidarka or Baidarka archives without author's
permission
> Submissions: baidarka@paddlewise.net
> Subscriptions: baidarka-request@paddlewise.net
> Searchable archive: http://rtpnet.org/robroy/baidarka
-- Baidarka Mailing List - All postings copyright the author and not to be reproduced outside Baidarka or Baidarka archives without author's permission Submissions: baidarka@paddlewise.net Subscriptions: baidarka-request@paddlewise.net Searchable archive: http://rtpnet.org/robroy/baidarka
This archive was generated by hypermail 2b27 : Wed Feb 01 2006 - 01:30:00 EST