''All Text in one Page''

Back	Back to Start	Mike Sandlin	Overview	Design	Next

More than a year later, I can say these real aircraft wheels are way too small and way too expensive.

Lesson learned:
Mike is right. Now there are two wheelbarrow wheels...

Contents

[Navigation]
[The BUG2]
[Construction]
[Assembly]
[Flight Simulation]
[Flight Sim Cockpit]
[Page Index]
[Text Only]

Hendrik Maroske Tennweg 13a, 78315 Radolfzell, Germany, Tel +49 7732 12783

Navigation

Now click the slide (the compass) to proceed to the next page.

The above image is from Mike sandlin's web site, http://home.att.net/~m--sandlin/bug.htm which I recommend as the source of information.

My own version of the BUG2 incorporates a second wheel and the changes to the design have been large, crude and nothing is tested as yet. To make this unmistakingly clear, I have not intended to improve the original BUG design in any way. My own objective is that I want to learn what it takes to design an airplane, and in the process I have made and will make errors. I have not copied anything until I felt I have understood the reason for why it has been designed the way it is. Since time is going on, there is no easy way back to the original, even if I wanted to.

These pages are most useful for you if you are already building a BUG4 and want to see how things come out in the end. I have learned a lot from the differences between BUG2 and BUG4, and you may learn from the differences from your BUG4 to my rather crude imitation of a BUG2. If you have any doubts or feel unsure what to do, I recommend to stick with Mike Sandlin's original design. If on the other hand you want are already building according to the BUG4 plans and want to know "what happens if I just..." or "what is this going to work like" then you are welcome here.

There is no way around the requirement to fully understand the original drawings. I'll help out with as much as I can, but please, Take Care.

The BUG2-2 construction still goes on

Wing

Fuselage

Fuselage/Wing

Workspace filling up:

Etcetera

For the flight dynamics model, I have choosen to modify the LaRC-Sim code that is provided with the FlightGear package. This code is quite old, but from my University background I have easy access to it because it is written in regular "C" in the fashion that I have once learned to understand. Also, my old slow computer can translate this a lot faster than "C++".

Navigation

Contents

[Design] [Assembly] [Provisionals] [Page Index] [Text Only]

Hendrik Maroske Tennweg 13a, 78315 Radolfzell, Germany, Tel +49 7732 12783

More than a year later, I can say these real aircraft wheels are way too small and way too expensive.

Lesson learned:
Mike was right. Now there are two wheelbarrow wheels...