''TDY-16F by Thomas Yost''
Click here to Continue

Previous slide Up to the Index Design Hints Introduction and Overview Next Slide

Tom writes:
In order to reduce weight, TDY-16 is built using 3/4in X .035 tubing. In addition, there are 6 HDPE cross sections (FAP-16 has seven). The HDPE stem/stern use lightening holes, and the coaming will be made of fiberglass. The frame, without coaming, weighs 13.5lbs. Completed weight with 13oz. PVC skin material should be approx. 25 lbs.

Contributors to this page: Thomas Yost (TDY), Patrick Poirier (PPR), Gerald Maroske (GUM) and Hendrik Maroske (HHM)