''SPY-10 by Thomas Yost: Sailrig AKAs''
Click here to Continue

Previous slide Up to the Index Design Hints Introduction and Overview Next Slide

The twin 10 foot akas are made of 1.5"X.049 tubing and break down into three sections. The center section is 4 feet, and the outer sections are 3 feet each. There are two 27" inserts per aka, which are made of 1-3/8"X.058 tubing. The akas are spaced six feet apart as I felt that was a minimum distance for paddle clearance.

My workshop is pushed nearly to it's limit when the sailrig is assembled.

Contributors to this page: Thomas Yost (TDY), Patrick Poirier (PPR), Gerald Maroske (GUM) and Hendrik Maroske (HHM)